Massey Ferguson MF 165 Service Reference
Fuel System Service
Fuel filter replacement interval, bleed procedure after filter change, and fuel system specifications.
Fluids & Capacities
| System | Capacity (US) | Fluid |
|---|---|---|
| Fuel Tank Diesel: fill tank before empty — running dry requires air-bleeding the entire fuel system | 18.5 US gal | Gasoline (93 octane min) or No. 2-D Diesel |
Service Intervals
10-Hour / Daily
- Fuel Tank: Check and fill as necessary — keep tank full to prevent condensation
- Primary Fuel Filter (Diesel): Inspect agglomerator bowl for water — drain if present(Water in fuel will damage injection pump and injectors)
- Fuel Sediment Bowl (Gas): Check for water and sediment — clean as necessary
500-Hour
- Primary Fuel Filter (Diesel): Replace filter element and air-bleed the fuel system
750-Hour / Annual
- Carburetor (Gas): Drain fuel and sediment from bowl — clean and adjust
- Secondary Fuel Filter (Diesel): Replace filter element and air-bleed the fuel system
Fuel System
Gasoline
Gravity flow. Carburetor idle mixture approx. 1 to 1-1/4 turns open. Fixed non-adjustable main jet.
Diesel
Pressure-fed. CAV DPA injection pump. Two full-flow filters with replaceable elements. Static timing 26° BTDC.
Parts in this Assembly (30)
883786M91
2 cross-refsFuel Filter
1024060M1
Bolt
1032433M1
Washer
1632800M1
Casting
1851891M1
Gasket
1851887M1
Gasket
1632719M1
1 cross-refContainer
1632721M1
Gasket
1632720M1
Shaft
1632641M1
Gasket
1632642M1
Plug
964004M1
3 cross-refsFilter
1805189M1
Bolt
1805190M1
Washer
1805191M1
Casting
1805193M1
Gasket
1805192M1
Gasket
1805185M1
Element
1805183M1
Gasket
1805184M1
Container
1805186M1
Gasket
1805187M1
Shaft
1805188M1
Gasket
890976M91
Filter
1851889M1
Washer
1024394M1
Casting
1851890M1
8 cross-refsElement
891797M91
Container
1640997M91
Part
1049939M91
5 cross-refsFuel Filter Element