The MF 275 and MF 285 use the Perkins AD4.236 four-cylinder diesel engine. The spin-on oil filter OEM number is 1447082M1 — the same filter used on the MF 265. If you have cross-reference data for the MF 265, it applies directly to the MF 275 and MF 285.
MF 285 compatibility: The MF 285 uses the same AD4.236 engine as the MF 275 and shares the same oil filter. All cross-references listed here fit both models.
Change interval: Every 200 hours or annually, whichever comes first. Reduce to 100-hour intervals in dusty or high-output conditions.
Oil capacity: Approximately 8.5 quarts (8.0 litres) with filter. SAE 15W-40 diesel engine oil. In sustained temperatures below -10°C (14°F), 10W-30 is acceptable.
Pakistan and South Asia: The MF 275 is one of the most common tractors in Pakistan and India. Fuel and oil quality varies between markets. Use a reputable brand SAE 15W-40 with API CF rating or better. Change intervals of 150 hours are advisable in high-load conditions with variable fuel quality.
Installation: Lightly oil the filter gasket. Hand-tighten to seat, then 3/4 turn firm. Do not over-tighten — the spin-on mount is cast alloy and will strip if force is applied.
Cross-Reference Table
| Supplier | Part Number | Fit | Notes | |
|---|---|---|---|---|
| Wix | 51734 | Drop-in | Direct spin-on — AD4.236 | |
| Baldwin | B7 | Drop-in | Direct spin-on | |
| Fram | PH3614 | Drop-in | Direct spin-on | |
| Donaldson | P550162 | Drop-in | Direct spin-on | |
| Fleetguard | LF3970 | Drop-in | Direct spin-on | |
| Mann | W 940/25 | Drop-in | EU market |
Specifications
- Capacity
- ~8.5 qt (8.0 L) with filter
- Change interval
- Every 200 hours or annually (150 hours high-load/variable fuel quality)
- Viscosity
- SAE 15W-40 (10W-30 below -10°C)
Looking for more MF 275 parts? Browse the full MF 275 parts catalog →
Get the free MF 275 Quick Reference Card
Capacities, fluid specs, filter cross-refs, torque specs — one printable page.